LED strip lights look very beautiful when glowing in bright colors. Generally, they are available in multi colors. Sometimes, they start malfunctioning. However, you can fix LED lights that are of different colors.
Some users prefer to choose mono colors. The purpose is to sync with the room setting. While others like me use multi colors. I have installed multi-color LEDs in my house to highlight certain areas.
They look unattractive when glowing in bad colors. But, I have found some very useful hacks to fix this issue and fix led lights. In this guide, I will explain the causes and the solutions to this problem.
Table of contents
1. Check Types of Lights
It may be the natural function of the strips to change colors. Because they are of various types and styles. Some glow straight in a single color. While others are designed to shift between different colors.
If this is the case, check the user manual of your strips. Fortunately, the color patterns can be adjusted and customized. So, the problem can be solved.
2. Connect Firmly
Sometimes, the issue occurs due to a minor reason. For example, the lights are not plugged firmly into the power outlet. The power cable or adapter is defective. So, you have to check all these things.
Make sure the strips are connected properly to each other. Check the connectors and linking points. Another tip is to plug into a different power outlet. Maybe the current outlet is not delivering the required voltage.
3. Reset LED Lights
The color-changing issue may be temporary. It can be solved by resetting your LEDs. Unplug the strips from the power outlet. Wait a few minutes before turning them back ON.
Find and press the reset button on the adapter. Moreover, you can reset the lights via the mobile app. Try a factory reset to restore default settings. Hopefully, they will start working normally.
4. Clean Your Lights
Dirt build-up can be a reason your lights are not glowing in original colors. They look dim or differently colored. So, clean the lights completely. Be sure to turn off the power supply.
Use a soft and dry cloth to clean them. Moreover, clean the contact points and connectors. If dirt is hard to remove, use a glass cleaning liquid.
5. Fix Overheating
Overheating is the major reason your LED strips have changed colors. The strips are equipped with heat-sensitive resistors. Too much heat cause changes in the hues. Overheating can be prevented by proper ventilation.
Moreover, make sure there is no heat source near your strips. Protect the strips from direct sunlight exposure. The best solution is to turn OFF the lights until they cool down.
6. Check the Dimmer Switch
Most LEDs are controlled by a dimmer switch. Their brightness output can be adjusted. You need to check the dimmer switch whether is working correctly or not.
Replace the switch if it is faulty. Also, check the compatibility of the dimmer. Always use the dimmer by the same company from which your lights come. Otherwise, the switch will not function properly.
7. Test the Remote
As you know, strips are operated by remote control. A malfunctioning remote can stuck. This, in turn, causes the lights to stuck in a certain mode.
Related: LED Lights Turn Red Rather than Turning OFF Best Solutions
Therefore, the lights glow in different colors. Reset your remote or replace the batteries. Find the reset button and press it to reset.
8. Control Voltage Fluctuations
This is the second common reason for color changes. Voltage fluctuations occur due to extreme weather conditions or power surges. Generally, the power supply company is responsible for this issue.
A sudden power surge or low power damages the lights. They start flickering or lose original hues. When the power returns fully, the strips work normally.
9. Examine the Wiring
Faults in wiring or incorrect installation also lead to this issue. It happens when the power and ground wires are connected to the wrong terminals.
So, check that all connections are accurate. If the wiring is wrong, you will also face issues with other electronic devices. It is recommended to call an electrician for a detailed checkup.
10. Look for Faults in LEDs
If nothing is wrong, your LED strips are faulty. Either they have expired or gone bad. Look for dark spots or irregular lightning across the strips. Contact the company for submitting a complaint.
Ask for replacement if they are under warranty. However, if the warranty is expired, replacing the strips is the only solution.
FAQs About LED Lights
Read the following frequently asked questions to learn more about the LED lights, their functioning, problems, and solutions.
Why are my LED strip lights blinking?
Most probably, the connection between the power supply and the lights is loose. Moreover, there can be a problem with the driver. Because the driver is responsible o converting AC into DC. If it malfunctions, your LEDs keep on blinking abnormally.
Why my LED lights have turned yellow?
Many factors are responsible for turning your lights yellow. It can be due to the degradation of LED materials. In addition, high temperature, improper or fluctuating voltage, and poor power supply also turn them yellow. Provide adequate power, protect from heat, and choose high-quality LEDs to avoid such issues.
What to do if half of my LED strips are not working?
The major reason is the poor power supply. Half of the strips cannot receive enough power and do not work. Plug them into a different working power outlet. Another cause is the bad connectors or controllers.
Also Read: My LED Lights Green When OFF Best Solutions
Final Suggestion
So, there are a number of ways to fix the LED lights that are glowing in different colors. I have mentioned all the fixes in this guide. Hopefully, they will work for you. Do not forget to give your feedback in the comment section.
