Water Pump Not Turning ON-Top Best Solutions

by

Last updated on October 17th, 2023 at 09:07 pm

If you have bought a good quality water pump and correctly installed it, you have not had any issues for many years. With regular maintenance, minor problems can be solved. But if the pump is not working efficiently or is not turning ON, then the problem could be severe.

Don’t panic! We are here to solve your problems.

Table of contents

Things You Should Check If Water Pump Not Turning ON

My father is a licensed plumber, when he doesn’t stay at home and our water pump is not turning ON or we faced any problem related to the water pump, he told us to check the following things:

Check The Power Source

If your water pump is not turning ON, the first thing you should check is that the water pump is gaining the correct supply of electric power. Different water pumps need different power supplies.

Heavy-duty water pumps need more electric power than easy-duty water pumps.

Solution

If your water pump is not turning ON, Provide the correct amount of power supply to the water pump for its efficient performance. Read carefully the water pump specifications from the booklet provided by the manufacturer company.

Check If The Switch Is Turn ON or Not

Sometimes in forgetful situations, we forget to turn ON the switch, which is very basic in turning ON the water pump.

Solution

If your water pump is not turning on, make sure that the switch is turned ON.

Check the Water Pump Wiring

If there is a proper power supply to the pump and the switch is ON, and still, the water pump is not turning ON, there is a possibility that the wiring between the water pump and the power supply is damaged.

Water Pump Not Turning ON-Top Best Solutions

Solution

Use good-quality wiring for the water pump. Find the damaged part of the wire and try to repair that part. If the damaged part is repairable or replaces the wire with a new one if it is unrepairable.

Check For Overheated Water Pump

If the water pump is not turning ON, there may be a reason that the water pump is continuously running for many hours. Due to the continuous running, the water pump may be overheated. There is a thermal switch that automatically turns off the water pump if it is overheated.

The bad bearings of the water pump, a failing motor, or if the pump is receiving low voltage can also overheat the water pump and shut off on thermal reset.

Solution

In case of overheating, shut off the water pump for some time, and leave the water pump to cool down. Find the cause of overheating and try to overcome it.

Check The Sound Of The Water Pump

The water pump sound is the first and main thing that tells the underperformance or proper performance of the water pump. A little change in the water pump sound can alter you that there is a problem with the water pump.

If there is a popping sound near the impeller, there must be air stuck in the pump. This may occur when there are tiny air bubbles in the water due to pressure changes in the liquid. This may damage the impeller or the whole water pump.

Solution

If the is any change in the water pump sound, find the reason urgently. Don’t ignore the minor change in the water pump sound.

Check The Proper Installation of The Water Pump

Check the impeller is installed properly. pipes and pump are installed correctly. If there is any improper installation the water pump cannot efficiently or maybe it would not even work.

Solution

Properly install the water pump. Keep in mind the minor details while installing the water pump.

Check The System Leakage

If there is any leakage in the pipelining, or fitting the water pump will not work. Make sure there should no leakage in the whole pump system.

Solution

Repair the leaking or defective component of the water pump system.

Check System’s Wear and Tear

No matter how high-quality your system is, it will eventually suffer from wear and tear. After completing its lifespan the system ultimately goes through wear and tear. This is the time when you should replace your water pump.

If there is any defect in the water pump the water pump will not turn ON.

Solution

Replace the defective part or the whole water pump system.

Check The Pressure Gauge

Check the pressure on the pressure gauge. The pressure gauge is used to measure the pressure of the fluid. If the pressure on the pressure gauge is lower than the specified pressure, the water pump will not turn ON.

Solution

If your water pump is not turning ON, maintain the water pressure according to the water pump’s requirements so that the water pump can turn ON.

Check Breaker or Fuse Box

The water pumps rely on electric power. If the water pump is not turning ON, check the circuit breaker or fuse box. If the breaker is tripped, there is something wrong with the electric supply.

Solution

Reset the circuit breaker and restore the power supply.

Check The Clogging In The Pressure Switch Tubing

If the water is hard, it has minerals and impurities in it. The impurities may stick in the pressure switch tubing or the water pump pipelining. Due to this clogging, the water pump is not turning ON.

Solution

Use water softer to turn hard water into soft water, so there is less chance that the impurities stick in the pipelining.

It’s human nature when we interact with a new gadget or machinery, there are a lot of questions and confusion in our mind about it. Here are the answers to some of your confusion, which is as follows:

What controls the water pump?

The signal to the booster pumps to turn off or on at present levels and the pressure switch to sense the pressure in the supply line mostly controls the water pump.

How long a Water pump lasts?

The estimated lifespan of a water pump is 60,000 miles to 90,000 miles.

Is the water pump repairable?

Yes, a water pump is repairable. The defective parts of the water pump can easily be repaired.

Can a water pump work without electricity?

Yes, there is a way in much the water pump can work only with sunlight.

How often do water pumps fail?

Generally, the good-quality water pump fails after completing its lifespan. Most of the water pump fails after 100,000 miles of its running.

How long does it take to repair a failed water pump?

It can take almost two hours to most of the day to repair a failed water pump.

When should the water pump be replaced?

The water pump should replace after 60,000 miles to 100,000 miles of its running.

What is the life of a pump?

The average lifespan of a water pump is 8 years to 15 years.

Related: Why is my jet pump not running well?

Final Thoughts

If your water pump is not turning ON, there may be many reasons. First, try to find out the actual cause then resolve the problem. If the problem is still consistent then call a licensed plumber and hand over the problem to the expert.

Hopefully, this article may solve your problem related to the water pump.