An ultrasonic humidifier artificially increases moisture in the environment. Sometimes, the users face the Ultrasonic humidifier not working or not producing mist issues.
This is really an inconvenient situation. Most people suffer severe allergies or other health conditions in dry air.
So, they use humidifiers to add humidity in offices, bedrooms, living rooms, or other indoor places. It helps in controlling dry throat, nose, sinuses, dry skin, and other similar conditions.
Apparently, the humidifier stops working for no reason. But, it has some root causes. Hence, you should learn these reasons and their solutions.
This article will guide you in detail that how you can fix your Ultrasonic humidifier it is not working.
Table of contents
How Does Ultrasonic Humidifier Work?
Before trying to fix your Ultrasonic humidifier, you should know how it works. This device includes a water tank and a diaphragm.
The water tank produces droplets and the diaphragm forces them into the atmosphere in the form of mist. The diaphragm vibrates at a frequency that is inaudible by human hearing.
Therefore, this device is called Ultrasonic. This humidifier produces a cool mist as it does not have any heating element. Moreover, it is safe to use and consumes less electricity.
1. Clean the Humidifier
The most probable cause of your Ultrasonic humidifier not working is the blocked diaphragm.
As you know, the diaphragm vibrates to send mist or vapors into the environment. However, it can be blocked when not cleaned for a long time.
The vibrating membrane gets clogged by dirt or water debris. Moreover, sometimes, tiny insects enter the device and cause blockage.
Hence, the humidifier will produce less mist or will stop working at all. Soak the water tank in vinegar solution for 20 minutes.
It will help to get rid of the yellow debris extracted from water. Use a clean toothbrush to clean the rest of the stains.
Since a humidifier does not have a water filter, it is likely to accumulate mineral remains. Ideally, you should clean it once or twice a week.
2. Replace Water
An effective tip is to replace the water in the tank. Sometimes, water has impurities that are stuck inside the vapor outlet. Further, impure water cannot produce mist properly.
So, you should replace the water in the tank of your humidifier. If possible use distilled water. Clean the tank thoroughly and look if anything is blocking the outlets.
You should clean your humidifier regularly using a soft cloth. A bad odor from the humidifier indicates that the water tank is too dirty.
3. Examine the Device
Some Ultrasonic humidifiers work by connecting directly to the wall power outlet. While others may have a rechargeable battery.
In both cases, you need to ensure that your humidifier is receiving enough current and working. Plug the humidifier into a different power outlet.
Make sure its light indicator is green. Also, check the power cable for the signs of damages or cuts. Replace the cable if it is defective.
Moreover, check the water level in the humidifier and fill it up to the recommended level.
If your humidifier is producing a lot of noise, it indicates loose screws. Inspect and tighten all the screws to fix the issue.
4. Set the Humidifier Properly
Another possible reason is that your humidifier is not set properly. You should always follow the manufacturer’s instructions accurately.
It is suggested to read the user manual thoroughly and act accordingly. Place the humidifier on an even surface. The water tank should be adjusted properly.
Listen to the noise of flowing water when you turn ON your humidifier. If it is set properly, you will hear the sound. Otherwise, adjust the water tank again.
5. Check the Humidistat Sensor
A humidistat sensor helps to detect and maintain the humidity level. Your ultrasonic humidifier can stop working if this sensor is malfunctioning.
In this case, you require to replace the sensor. Nevertheless, it may cost you too high. Instead, consider replacing your humidifier itself.
Generally, an Ultrasonic humidifier lasts 3-5 years depending on maintenance and quality. If you have used your humidifier for more than 3 years, consider purchasing a new one.
6. Look for Hardware Defects
The above-mentioned tricks should fix your Ultrasonic humidifier. However, if they fail to work, you should focus on the hardware.
Some internal component of the device is damaged. Maybe the diaphragm has developed a defect or another component is broken.
Maybe your humidifier has a leakage hole. So, turn it around and examine it from all sides. Tighten the screws if you notice any leakage.
The fault can be built-in. So, you should carefully observe your device immediately after purchase.
If your humidifier has not exceeded the warranty, consult the manufacturer. Ask for a repair or replacement.
An Ultrasonic humidifier is an amazing device for maintaining humidity around your rooms. This device works efficiently if you take care of it.
To avoid any problem, clean your Ultrasonic humidifier regularly. Consult our guide and apply all the tricks.
They will fix your Ultrasonic humidifier if it is not working or not producing mist. Freely ask us if you have any other queries about an Ultrasonic humidifier.