Last updated on October 13th, 2023 at 07:39 pm
The smart bulbs and lights offer convenient controls by linking to the internet. But, it is very frustrating if your Smart Life Bulb is not connecting to Wifi.
The issue is quite common and I personally faced it many times. It happens due to different temporary reasons. However, the problem can be solved easily.
You have to follow a few troubleshooting tricks. This guide would explain all the hacks that can eliminate the connection issue.
Fixing Smart Life Bulb Wifi Connection Issues
At my home, there are many Smart Life bulbs. They often fail to connect to Wifi. Therefore, I did learn some quick troubleshooting methods. In fact, you have to perform some basic checks with me.
1. Check Compatibility
The first thing you need to check is compatibility. Make sure your Smart Life bulb is compatible with your bandwidth. Confirm this from the user manual.
Most bulbs support 2.4 GHz. While your router may be running on 5 GHz. Hence, you should enable 2.4 GHz on your Wifi router. Then, link your device.
2. Keep the Devices in Range
Your Smart bulb may be too far away from the Wifi router. Therefore, it cannot detect internet signals. So, move the devices closer and try connecting again. Also, check the data transmission range of your router.
Set the best mode such as “pass-through wall”. 5 GHz Wifi has a shorter range as compared to 2.4 GHz. You can install an extender if Wifi coverage is short. Because bulbs are installed everywhere in the home.
3. Power Cycle Wifi Router
The issue can be posed by your router. It has a temporary glitch. Power cycling can help fix the problem.
- Unplug your router from the wall power outlet and turn it OFF completely.
- Wait for 30 seconds or 1 minute.
- Now, plug the router back into the outlet.
- Finally, turn it ON and try linking your bulb.
4. Test Signal Strength
Another reason for connectivity issues is weak network signals. The problem can be on the part of your network provider. This can be tested via other devices at your home.
Check the signal strength on other devices linked to your Wifi router. For example, you can test network speed through a smartphone, tablet, or computer. If the network is slow, troubleshoot your router.
5. Change the Password
This trick really works. It helped me successfully to solve connection issues. Change the Wifi password. Choose a simple one instead of a complicated one.
Sometimes, complicated or long passwords hinder the connection. Also, make sure that you are entering the exact and correct password.
6. Switch OFF VPN
Most internet connections use a VPN. It is used for encryption and security. Hence, the Wifi may not be detected by some devices. Go to the settings of your router. Switch OFF the VPN and connect the Life bulb again.
7. Reset Your Smart Life Bulb
Resetting your Smart Life bulb can also help. Here is the reset process;
- Turn ON your bulb for 3 seconds.
- Then, turn it OFF for another 3 seconds.
- Repeat the same process 3 times consecutively.
8. Contact Manufacturer
You should repeat each troubleshooting step twice or thrice if it does not help on a single try. However, if no trick helps, you must contact the company or the dealer.
Your Smart Life bulb may have a built-in fault. The company will give a replacement if the product has not exceeded the warranty.
FAQs About Smart Bulbs
Read the following frequently asked questions to learn more about smart lights, their functioning, problems, and solutions.
How to reset my Smart Life bulb?
Press and hold the reset button on your bulb. Release the button when the LED indicator starts flashing slowly. Another way to reset is to switch your bulb OFF and ON 3 times in a row. Stop when the light starts flashing slowly. Repeat the reset process if the indicator flashed quickly.
Do Smart bulbs use electricity when they are OFF?
Since they connect to the internet, smart bulbs use electricity even when they are OFF. This phenomenon is called Vampire Power. But, it is not a matter of concern because the power consumption is negligible. One smart bulb uses power worth a penny or two per month. Experts say that they use 0.2-0.5 watts in standby mode.
How many Smart bulbs can I link to my Wifi router?
Smart light bulbs do not consume too much bandwidth or WAN. Ideally, 15 smart lights can be connected to a single Wifi router. A higher number can affect your network efficiency.
What are the disadvantages of smart bulbs or lights?
One of the biggest drawbacks of smart lights is their higher cost. The standard incandescent bulbs cost only $1. While non-smart LED lights cost about $5. In contrast, a smart bulb costs $15. In addition, it consumes the internet.
How do smart bulbs work with the internet?
Smart lights and bulbs are Wi-Fi-supported. By connecting to the internet, you can control and customize the bulb remotely. They can either connect directly to the internet or via the dedicated smart hub. The hub then connects to the Wifi router and to your mobile phone or tablet.
Also, Go Through: Why My Smart Life Bulb Goes Offline Issue Fixed
Final Thoughts
Solving the connectivity issues is not a big problem. You have learned the best hacks to fix your Smart Life Bulb that was not connecting to Wifi. Be sure to try all the solutions. I am 99.99% sure that your bulb is now connected successfully.
