How to Stick LED Lights on Wall without Adhesive-9 Simple Hacks

LED strip lights provide a stylish outlook to your room. However, the adhesive can damage the wall paint. So, you should find a way to stick LED lights on the wall without adhesive.

Fortunately, there are multiple ways to install the strips on the wall. As compared to adhesive, other methods are safer and damage-free. Surely, you want to learn alternate ways. So, stay with me till the end.

1. Double-sided Tape

It is one of the easiest methods to stick the LED strips on the wall. You just need to buy a roll of double-sided tape. But, purchase a high-quality tape to ensure firmness.

First, decide the location and cut your LED strips into the required sizes. Stick the tape at the back of the strip lights. Now, peel off the other side of the tape to remove the protective covering.

Stick the combo on the wall and press firmly at each point. There are many types of double-sided tapes such as cello tape, masking tape, and 3M tape. If you want to remove it, use a heat gun or hair dryer to reduce its stickiness.

How to Stick LED Lights on Wall without Adhesive-9 Simple Hacks

2. Command Strips

It is another alternate method. You have to buy good quality command strips. These are small adhesive strips but do not damage the wall. You can use them for temporary and strong installations.

Stick the Command strip to the back of your strip lights. Then, use the other half to stick the LEDs in place. Kindly read the instructions written for your product to install it properly.

3. Velcro Strips

Velcro strips are also a great option to hang the lights without damaging the wall. They give you a seamless setup. Just peel the backside of the strip and stick it to your lights.

Next, stick the LED lights on the wall. However, read and follow the instructions on your Velcro strips.

4. Magnets

Using magnets is an amazing trick to hang your strips on the wall. The biggest advantage is that you can remove the strips anytime and shift them to another place.

Another benefit is that magnets would not damage your wall. Further, the installation is very strong. However, this method works for drywall that has screws inside.

Purchase A size 7mm magnets that are not so expensive. Attach the magnets at the back of your LED strips and then stick them to the wall. Adhesive-back magnets are great for this purpose.

5. Hooks and Nails

Hooks and nails are permanent solutions for hanging strips. However, they will leave marks on your wall. But, if you intend to install the lights permanently on a particular wall, you should go for this option.

Use small hooks and nails. Mark the wall and screw nails or hooks into it. Then, you can loop the LED strips around the hooks.

6. Staple

The staple is also a semi-permanent solution. If you do not intend to remove the lights from a particular wall, staple them.

However, do not staple on the LEDs to damage the circuit. Instead, use the cutting lines for staple. You have to be very careful if you go for this option.

7. Mounting Clips

These are clips with screws. You have to install the mounting clips on the wall. Place each clip at a distance of 12 inches or 1 foot. If you increase the distance, the installation will not be too firm.

You need a drill to install the mounting clips on the wall. Then, adjust the LED strips on the clips. This solution is good for permanent installation.

8. Mounting Putty

I believe it is an amazing thing. Because it has many advantages. For example, mounting putty does not leave any marks, does not damages the wall, and can be removed easily.

Further, you can mold it in any shape. So, you get a seamless installation. Stick the mounting putty at the back of your LED strips and then stick it on the wall.

9. Cable Ties

If you want to lock your LED strips on the wall, use cable ties. It is one of the secure ways to install the strips. Use transparent or white ties. Drill tiny holes in the wall at a distance of 6 inches.

Now, put the cable ties into holes, pass around the strips, and lock them in place. If there is another object on the wall, you can tie it around it instead of digging holes.

FAQs Regarding Installing LED Strip Lights

Here are some of the significant questions regarding the strip lights. They will help you further in installing the lights.

How to stick LED light strips to the wall?

Most LED strips come with a 3M adhesive backing. First, prepare the surface or the wall. Decide the pathway and style. Next, cut the strips into the required sizes. Finally, peel off the protective covering on the adhesive back. Stick the strips to the wall and press gently to attach firmly.

How do I re-stick LED strips to another surface?

First, clean the adhesive back of the strips. Next, prepare the new surface. Put 3M glue on the back of the strips because the original adhesive cannot work anymore. Now, you can re-stick the lights to a new surface with the help of extra glue.

How do I remove LED strips without damaging the wall?

If you remove the LED strips carefully, the wall paint will not be damaged. Apply a hair dryer to lose the adhesive a little. Then, you can remove strips easily without damaging the wall. However, do not use too much heat to destroy the LEDs.

Do LED lights cast negative effects on the environment?

Conventional incandescent and compact fluorescent lights release a significant amount of greenhouse gas. In contrast, LED lights release lower amounts of harmful gases. According to the experts, LED lights release 80% less amount of Greenhouse gases as compared to other bulbs.

Do all colors of LED lights use the same amount of power?

The voltage consumption depends on the color of LED lights. For example, red LEDs use the lowest voltage. While yellow and green consume a bit more power. So, all colors do not use the same amount of power. But, still, the power usage is much less than common lights.

Also Read:  Hang LED Strip Lights in Bedroom Best Solutions

Final Words

Hopefully, you have learned a lot through this article. It explained 9 ways to stick your LED strip lights to the wall without adhesive. All methods are simple and easy. Do not forget to tell in the comment section which method you liked the most.

Leave a Comment