Last updated on October 13th, 2023 at 07:39 pm
Colorful lights are an amazing option for home decor. Fortunately, there are multiple styles to hang LED strip lights in a bedroom.
The process of installation is very simple and easy. However, if you are using the strips for the first time, you may be confused.
Believe me, you can install lights by yourself. This guide will remove your worry by teaching you the ways of hanging LED lights.
Table of contents
Necessary Items and Tools
Before starting the process, you should have certain necessary items. Otherwise, you will be searching for them in the middle of the process. So, be sure to provide yourself with the following items;
LED Strip Lights
Of course, the first and foremost thing is having LED strip lights. You may be wondering why I mentioned them. The reason is to guide you a little bit about the quality and purchase.
I recommend you consider the following points;
- Purchase high-quality LED lights from a renowned brand. Do not buy a cheap product. Otherwise, you will need to change it after a few months.
- If you intend to hang LED Strip Lights in Bedroom, buy from the same brand having the same voltage requirement.
- Prefer 12V LED strips over 24V. Because they have a shorter distance between cut-line intervals.
However, 24V is also good because it poses a minimum voltage drop. Moreover, they are good if you want a higher output.
Compatible Power Supply
As you know strip lights use low voltage DC. So, you need a compatible power supply device or adapter. Choose the one that can convert 120V/240V AC.
Too high or too low a voltage supply can damage your product. Moreover, the power cable and adapter are also needed.
They come with your lights as well. Additionally, calculate the total power. Multiply the number of LEDs by the voltage each light uses.
Controller
Most LED strips come with remote control. You can use it to switch the lights ON/OFF, adjust brightness, change colors/scenes, etc. Prefer to buy the lights with a controller.
Some brands also offer a mobile app that can work just like a remote. Find, install, and set up the app beforehand.
LED Connectors
Connectors are used to make long chains. They will help you join multiple LED strips together. Choose the right type of connector such as a two-hole or four-hole.
Installation Tools
In addition, you also need some very important tools. Arrange them before hanging the lights to avoid any hassle.
- Measuring tape
- Black electrical tape
- Wire strippers
- Scissors or wire cutter
- Screwdrivers
Hanging the LED Strips: Step by Step Process
Once, you have all the items and tools, be ready for installation. Here is the step-by-step guide;
Step 1: Test the Lights
Before installing, you should check the lights whether are working or not. Ideally, you should test them when purchasing from the store. However, test them again at home.
Just plug the strip into the power supply. Use the remote to test different functions. Make sure every function is working well and all lights come ON in their best colors.
Step 2: Decide the Location and Pattern
The most important thing is to decide the location. Next, decide on the pattern or style. Also, think about your purpose. For example, you may want to use LED strips as night lights or simply for room decor.
You can hang them on the wall behind your bed, on the cabinet, behind the TV set, around the window, on the ceiling, under the bed or sofa.
Likewise, there are multiple locations and styles depending on the setting of your bedroom. Moreover, the strips can be installed in spiral, circular, linear, twisted, or horizontal fashion.
Step 3: Prepare the Surface
The next step is to prepare the surface on which you have to mount the strips. It can be a wall, ceiling, floor, cabinet, furniture article, etc. Clean the surface thoroughly with a cloth.
Make sure the surface is not dirty, oily, or moist. If it is too dirty, use surface cleaner, isopropyl alcohol, hot water, or mild detergent depending on the material. The surface should not be rough, damaged, or unstable.
Step 4: Measure the Length
In this step, you have to measure the length of the total surface on which the strips have to be mounted. Consider the bends, corners, and style. Then, measure the length of your lights.
Cut the lights according to the surface. This is very essential for a professional installation and aesthetics.
For instance, the surface is 10 feet while you cut the strip 9.7 inches. How will you cover up the empty 3 inches? So, be accurate and work like a pro.
Step 5: Cut LED Strips
Now, you have to cut the strips in the required sizes. Use sharp scissors or a wire cutter. Identify the marked lines for cutting.
Cut the lights exactly on the dots or lines. These marks are after every 3 or 6 LEDs. Be very careful and do not damage the copper pads. Watch this video for learning the right way.
Step 6: Connect LED Strips
You may need to connect two or more strips together. There are two ways; one is using connectors and the other is soldering.
A connector clip is an easy method. Push the copper ends of the LEDs into the clip and lock it. For soldering, you need a solder, soldering iron, and experience.
Step 7: Hang the Lights
Multiple methods are used to hang the strips on a surface. Almost, all strip lights come with an adhesive back. First, be sure you have decided on the location, prepared the surface and cut the size.
Then, peel off the adhesive back gently. Stick the strip to the surface. Press with your fingers to apply some pressure so that they can stick firmly.
Other Hanging Options
In addition to adhesive back, LED strips can be installed in other ways. For example, you can use a mounting clip if you have to hang them like a garland.
Further, 3M glue or tape can be used if the adhesive is not strong. Masking tape, mounting putty, magnets, screws, and nails are other options. They ensure firm installation and keep the strips from falling off.
Step 8: Connect to Power Supply
The final step is to connect your strips to a power supply. Connect the strips to the supplied power adapter. If you have connected multiple strips together, you can use a single power supply.
Plug the power adapter into an electrical outlet. Check the batteries and turn ON the remote. Press any color button to check its functioning.
FAQs Regarding LED Strip Lights
If you want to learn more about hanging LED lights, read the following questions.
Can I install LED strips on the bedroom ceiling corner?
LED strips can be installed on the bedroom ceiling corner. It is an effective way to add accent lighting to your room. You need to use mounting channels so that lights do not fall off.
Where to hang LED lights in a bedroom?
There are many spots to hang LED lights in your bedroom. For example, you can install the lights under cabinets, beds, or sofas. Likewise, installing the lights along toe kicks, under shelves, and behind computers or LCDs.
Which color LED light is best for the bedroom?
Blue is considered the best color for a bedroom. Because it is a muted color and gives a calming effect. The cool effect of blue light on the brain has been confirmed by a study in 2018.
Also Read: Put Thumb Tacks in LED Lights Ultimate solution
Final Words
So, you can hang LED strip lights in your bedroom by following the 8 simple steps. Hopefully, this article will prove a complete guide for you. Let us know if you have further queries.
