Last updated on October 13th, 2023 at 07:39 pm
A smart bulb is an internet-enabled bulb. You can customize its features remotely. But, do you know how to connect your Smart bulb to 5ghz Wifi?
If you do not know the right connection method, follow this guide. I am going to teach you the right way. When I tried to connect my smart bulb for the first time, I was a little confused.
However, after some trial and error steps, I learned the correct method. I want to share my experience with you so that you may not face any difficulty. So, take advantage of my quick and simple guide.
Table of contents
What is Wifi 5 GHz?
GHz refers to Giga Hertz. It is the unit to measure the processing speed of the internet. 5ghz Wifi is faster than 2.4 GHz. It is a short-range network and works on higher frequencies or bands.
Thus, 5ghz is the latest network with the highest speed. It is ideal for high bandwidth devices such as video gaming or HDTV.
Advantages of 5 GHz Wifi
2.4 GHz is also a good internet band. But, in recent years, it has become crowded due to the connected world. Thus, the network performance is compromised.
On contrary, 5 GHz is not crowded and delivers higher quality data and faster speed. It also faces less interference. However, all smart devices do not support this band. Moreover, it has a smaller range.
So, you have to put all your devices closer to your router. An extender device can be used to enhance the range.
Connect Smart Bulb to 5 GHz Wifi
Most smart bulbs work on 2.4 GHz. So, they cannot be easily connected to 5 GHz Wifi. Here, I will tell you how to do it.
Step 1: Check Compatibility
Before connecting, check the compatibility of your smart bulb. Read the user manual or specifications. Make sure your product supports the 5 GHz band.
If it supports, link by entering your SSID password. However, if your bulb supports only 2.4 GHz, you cannot connect it to 5 GHz. Instead, you have to enable the 2.4 on your router.
Step 2: Enable Dual Band Systems
You have to create two separate SSIDs on your router. Many network providers offer dual-band systems. Both works side by side and can be turned off too. So, you do not need to create new IDs.
Instead, link your bulb to the 2.4 bands. Go to the settings of your router to access the dual-band. Turn OFF band 5 for a while and turn it ON again after linking the bulb.
Step 3: Create Two SSIDs
Open the browser on your mobile device or computer that is linked to your router.
- Go to the admin website of your router by entering the default IP address. This address is written on your Wifi router device or in its manual.
- Login to your account by entering your username and password.
- Go to the “Settings” section on the Home page.
- Next, click on the “Wireless” tab and then the “Basic” tab. Change the “802.11” band from 2.4 GHz to 5 GHz.
- Click the “Apply” button to confirm settings.
Alternate Trick: Link Your Smart Bulb to 2.4 GHz
Most smart bulbs do not support higher bandwidth. They can work well on 2.4 GHz. Because the bulbs do not require heavy file transfer. Instead, the internet connection serves to adjust settings.
So, you can link them pretty well to lower bandwidth. The biggest advantage of 2.4 GHz is that it has a longer range. In addition, it can pass through obstacles such as walls.
Hence, all smart bulbs in your home can work with this band. Therefore, experts recommend connecting your bulb to the 2.4 band. Do not fantasize 5 GHz if it is not available on your router or your bulb cannot link to it.
FAQs About Smart Bulb
Here are some frequently asked questions by the users. Hopefully, they will help you too.
What to do if I cannot switch between 2.4 GHz and 5 GHz?
On some routers, it is difficult to shift between dual bands. Because they feature automatic settings. Hence, the router adjusts the bandwidth on the basis of signal strength. In this case, you need to go for a second access point.
Why my smart bulb is not working on 5 GHz Wifi?
The major reason is that your smart bulb does not support 5 GHz. Turn OFF 5 GHz on your router and enable 2.4 GHz. Then, connect your bulb. Once the connection is successful, turn ON 5 GHz again. This trick helps in successful linking. Another reason can be the bulb is not in range. So, move it closer to the router.
Can I turn my smart bulb ON/OFF manually?
The answer is yes. In addition to mobile apps and internet control, smart bulbs also have a physical control switch. So, you can turn them ON and OFF physically by pressing the switch.
How long does a smart bulb last?
A good quality smart bulb can run up to 25,000 hours. While a simple LED bulb can last up to 50,000 hours. The smart features can affect the life expectancy of the bulb. So, standard LED bulbs are good investments.
Can I leave my smart bulb ON all night?
Yes, it is safe to leave your smart bulb ON all night. They do not pose any fire risk. One amazing feature of these bulbs is timed settings. It means you can program your lights to turn ON/OFF even when you are not at home. So, you can create an impression that someone is at home.
Also Read: Smart Life Bulb Not Connecting to Wifi Best Solution
Final Thoughts
By following this guide, you can easily connect your smart bulb to 5 GHz Wifi. I have explained the method in simple words. Tell us in the comment section if you want to learn anything else.
